Last Modified: 11-29-2007 1.6 A
Service Category: Drivetrain Section: Transfer/4wd/Awd
Model Year: 2008 Model: Sequoia Doc ID: RM0000030S8007X
Title: JF3A TRANSFER / 4WD / AWD: TRANSFER CASE REAR OIL SEAL: REPLACEMENT (2008 Sequoia)

REPLACEMENT

1. DRAIN TRANSFER OIL JF3A TRANSFER / 4WD / AWD: TRANSFER OIL: REPLACEMENT (2008 Sequoia)+

2. REMOVE PROPELLER SHAFT ASSEMBLY

DRIVE SHAFT / PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 4WD): REMOVAL (2008 Sequoia)

3. REMOVE REAR OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY JF3A TRANSFER / 4WD / AWD: TRANSFER ASSEMBLY: DISASSEMBLY (2008 Sequoia)+

4. REMOVE TRANSFER CASE REAR OIL SEAL

(a) Using SST, tap out the oil seal.

SST: 09308-00010

NOTICE:

Do not damage the oil-seal-fitted surface of the rear extension housing.

5. INSTALL TRANSFER CASE REAR OIL SEAL

(a) Apply transfer oil to the spline area of the output shaft.

(b) Using SST and a hammer, tap in a new oil seal until its surface is flush with the housing upper surface.

SST: 09316-60011

09316-00011

6. INSTALL REAR OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY JF3A TRANSFER / 4WD / AWD: TRANSFER ASSEMBLY: REASSEMBLY (2008 Sequoia)+

7. INSTALL PROPELLER SHAFT ASSEMBLY

DRIVE SHAFT / PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 4WD): INSTALLATION (2008 Sequoia)

8. ADD TRANSFER OIL JF3A TRANSFER / 4WD / AWD: TRANSFER OIL: REPLACEMENT (2008 Sequoia)+

9. CHECK TRANSFER OIL JF3A TRANSFER / 4WD / AWD: TRANSFER OIL: ON-VEHICLE INSPECTION (2008 Sequoia)+

10. INSPECT FOR TRANSFER OIL LEAK